Evaluation the effect of sewage sludge ash on physical and rheological properties of bitumen

Ziari, Hassan; Ramezanianpour, Amir Mohammad; Amjadian, Youssef

doi:10.22075/jtie.2020.20044.1447

Evaluation the effect of sewage sludge ash on physical and rheological properties of bitumen

Document Type : Research Paper

Authors

Hassan Ziari ¹

Amir Mohammad Ramezanianpour ²

Youssef Amjadian ³

¹ Department of Civil engineering, Iran university of Science and technology, Tehran, Iran

² Civil Eng. Dept., University of Tehran

³ School of Civil Engineering, Iran University of Science and Technology, Tehran, Iran

10.22075/jtie.2020.20044.1447

Abstract

In this study, the physical and rheological properties of bitumen containing different percentages of sewage sludge ash (SSA) were evaluated. For this purpose, the sewage sludge was burned at 900˚C, and remaining ash was used as bitumen additive in 0, 2.5, 5, and 7.5 percent by the weight of base bitumen. The penetration test, softening point test, ductility test, rotational viscometer test, dynamic shear rheometer test, and bending beam rheometer test were performed to evaluate the physical and rheological properties of different samples. The results showed that by increasing the SSA, the penetration and ductility of bitumen decrease, and the softening point increases. The addition of SSA increases the rotational viscosity of bitumen, but it is still much less than the allowable value of 3 Pascal. Second. The dynamic shear rheometer test showed that the addition of SSA to bitumen increases the rutting resistance and decreases the fatigue life of specimens. Also, the addition of SSA increases the potential of low temperature cracking.

Keywords

sewage sludge ash

physical properties of bitumen

rutting resistance

fatigue life

low temperature cracking